Center Fresh Air Visor - Honda GL1800 Service Manual

Hide thumbs Also See for GL1800:

Table of Contents

CENTER FRESH AIR VISOR

Remove the following from the windshield:

– two socket bolts

– two cap nuts

– four thrust washers

– center fresh air grille by releasing the tab.

– center fresh air visor

– two grommets

Remove the following from the air visor:

– cover plate

– lever cover

– steel ball

– lever click plate

– center fresh air lid

Install the lid on the visor.

Install the click plate by aligning the hole with the

boss on the visor.

Install the spring and steel ball into hole in the lever.

Install the lever onto pivot of the visor while align-

ing the slot with the pin of the lid.

Install the lever cover and screw.

TORQUE: 4 N·m (0.4 kgf·m, 2.9 lbf·ft)

Install the cover plate onto the lever cover.

Install the grommets into the holes in the visor.

Install the grille and visor onto the windshield by

aligning the tab with the slot.

Install the four washers, two socket bolts and cap

nuts, and tighten the bolts.

TORQUE: 1 N·m (0.1 kgf·m, 0.7 lbf·ft)

FRAME/BODY PANELS/EXHAUST SYSTEM