DISASSEMBLY/ASSEMBLY
• Do not loosen or tighten the white painted bolts,
nuts and screws of the throttle body. Loosening
or tightening them can cause throttle and idle
valve synchronization failure.
• The parts of the throttle body not shown in this
manual should not be disassembled.
IAC VALVE
Remove the two screws, IAC valve and seal rubber.
Install a new seal rubber into the throttle body
groove.
Install the IAC valve and tighten the screws.
TORQUE: 4 N·m (0.4 kgf·m, 2.9 lbf·ft)
FUEL SYSTEM (Programmed Fuel Injection)
IAC VALVE
SCREWS
EAL RUBBER
5-59