Air Cleaner Housing Removal/Installation - Honda GL1800 Service Manual

Disconnect the following:
Tilt the fuel tank to
– fuel pump 5P connector (page 5-54)
the right and
– fuel return hose (page 5-54)
remove it from the
– fuel feed hose (page 5-54)
left side of the
– fuel level sensor 2P connector
motorcycle.
– fuel tank tray drain hose
– fuel tank breather hose
Remove the four bolts, two washers, seat hook and
fuel tank.
Install the fuel tank in the reverse order of removal.
Route the hoses
and wires properly
(page 1-23).
AIR CLEANER HOUSING
REMOVAL/INSTALLATION
Remove the following:
– air cleaner element (page 3-6)
– fuel tank (page 5-56)
Disconnect the crankcase breather hoses from the
air cleaner housing.
Remove the four screws attaching the air funnels
and air cleaner housing from the throttle body.
• The screws cannot be removed from the air fun-
nels at this time.
Disconnect the air cleaner housing drain hose and
pulse secondary air supply hose and remove the air
cleaner housing.
FUEL SYSTEM (Programmed Fuel Injection)
RAIN HOSE
BREATHER HOSE
AIR CLEANER HOUSING
SEAT HOOK
CONNECTOR
REATHER HOSES
+4-9
RAIN HOSE
AIR SUPPLY HOSE
5-57