Honda GL1800 Service Manual page 435

FRONT WHEEL/SUSPENSION/STEERING
Tighten the bottom bridge pinch bolts to the speci-
fied torque.
TORQUE: 29 N·m (3.0 kgf·m, 22 lbf·ft)
Tighten the fork caps to the specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Tighten the top bridge pinch bolts to the specified
torque.
TORQUE: 26 N·m (2.7 kgf·m, 20 lbf·ft)
Install the secondary master cylinder onto the left
fork with new mounting bolts and tighten them.
TORQUE: 31 N·m (3.2 kgf·m, 23 lbf·ft)
Install the brake hose joint and tighten the bolt.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Clean the mating areas of the plunger case and
front fork with compressed air, and be sure that no
foreign materials are allowed.
Apply silicone grease to the anti-dive plunger tip.
Install the anti-dive plunger case with new socket
bolts and tighten them.
TORQUE: 4 N·m (0.4 kgf·m, 2.9 lbf·ft)
13-40
OTTOM RIDGE PINCH OLTS
ORK CAPS
TOP BRIDGE PINCH BOLTS
BOLTS
JOINT BOLT
ASTER CYLINDER
OLTS
PLUNGER
CASE