Honda GL1800 Service Manual page 434

Coat a new O-ring with fork fluid and install it into
the fork cap groove.
Install the fork cap onto the fork damper.
Hold the fork damper and screw the fork cap onto it.
Hold the fork damper lock nut and tighten the fork
cap to the specified torque.
TORQUE:
Fork damper lock nut: 20 N·m (2.0 kgf·m,
14 lbf·ft)
Screw the fork cap into the fork tube.
Tighten the fork cap
after installing the
fork tube into the
fork bridges.
INSTALLATION
Install the fork tubes into the fork bridges.
Route the wires,
Align the top of the fork tubes with the upper sur-
cables and hoses
face of the top bridge as shown.
properly
(page 1-23).
FRONT WHEEL/SUSPENSION/STEERING
-RING
OCK NUT
ORK CAP
ORK CAP
TOP BRIDGE
ORK TUBE
13-39