Left Fork Leg Disassembly - Honda GL1800 Service Manual

FRONT WHEEL/SUSPENSION/STEERING

LEFT FORK LEG DISASSEMBLY

Remove the two bolts and front fender mounting
plate.
Remove the axle holder bolts.
Remove the joint collar.
Check the dust seals for wear, damage or fatigue.
Check the needle bearings for damage or loose fit.
If the needle bearings are damaged, replace them
(page 13-32).
Remove the fork cap from the fork tube.
The fork cap is
Remove the O-ring from the fork cap.
under spring pres-
sure; use care
when removing it.
Remove the following:
– spacer
– spring seat
– fork spring
Pour out the fork fluid by pumping the fork tube up
and down several times.
13-26
XLE HOLDER BOLTS
PL TE
EEDLE BEARI GS
DUST SEALS
JOI T COLLAR
ORK CAP
ORK SPRING
SPRING SEAT SPACER