Field Service Ver.2.0 Jan. 2007
3.13.3
Replacing the feed roller
A. Periodically replaced part/cycle
•
Feed roller
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
*1
500/420
*2
360
Note
• When replacing the feed roller, be sure also to replace the separation roller assy at the same time.
B. Procedure
[4]
Confidential – for internal use only, do not distribute
[3]
[2]
[1]
50gaf2c010na
1.
Remove the bypass unit.
(See P.63)
2.
Remove the push-up plate assy.
(See P.66)
3.
Press the conveyance guide [1] in the arrow-
marked direction [2] to remove the support axis [3]
from the hole [4], and then remove the convey-
ance guide.
3. PERIODIC CHECK
69
1