Konica Minolta bizhub 500 Service Manual page 92

Field Service Ver.2.0 Jan. 2007
[3]
[2]
[4]
[3]
Confidential – for internal use only, do not distribute
[7]
[1]
[6]
[4]
[5]
50gaf2c165na
[4] [1]
[2]
50gaf2c166na
14.
Detach the hook [2] of the spring [1] from the
oblong hole [3].
15. Remove the C-rings [4], 1 each, and then remove
the 2 bearings [5].
16.
Remove the paper feed roller unit [6].
Note
• When attaching the spring, be sure to put the
hook into the oblong hole (not into the round
hole [7]).
17.
Remove the E-ring [1] and then remove the bear-
ing [2].
18. Remove the bearing [3] and then remove the feed
roller assy [4].
3. PERIODIC CHECK
59