Removing/Reinstalling The Operation Panel - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007
6.3.12

Removing/reinstalling the operation panel

A. Procedure
[5]
Confidential – for internal use only, do not distribute
[1]
[2]
[3]
[4]
50gaf2c064na
1. Remove the 4 screw caps [1] and then remove
the 4 screws [2].
2.
Remove the connector [4] of the operation board
(OB) [3] and then remove the operation panel [5].
Note
• When installing the operation panel, be sure
to install the connector [4] without fail.
3.
Reinstall the above parts following the removal
steps in reverse.
6. OTHERS
149