Konica Minolta bizhub 500 Service Manual page 104

Field Service Ver.2.0 Jan. 2007
[3] [4]
[2] [4]
Confidential – for internal use only, do not distribute
[2] [1]
50gaf2c172na
[1] [3]
50gaf2c173na
7.
Remove the C-ring [1] and then remove the bear-
ing [2].
8. Remove the bearing [3] and slide the shaft [4].
9.
Remove the C-ring [1] and then remove the feed
roller [2] from the shaft [3].
Note
• When installing the feed roller, be sure to take
note of the direction of the arrow mark [4].
10.
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
71