Malfunction Code; Malfunction Code List - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007

13. MALFUNCTION CODE

13.1 Malfunction code list

A. Note for use
Turn OFF/ON the power switch (SW2) of the main body when releasing an abnormal condition.
B. Code list
NOTE
• For codes with "*" given in the error code column, a message "Turn off the power and turn it on
again" is displayed on the operation panel.
• For codes with no "*" given in the error code column, a message "Contact the service" is dis-
played.
Classification Code
Drive C-0201
C-0202
C-0203
C-0204
C-0205
C-0206
Confidential – for internal use only, do not distribute
Causes
The upper limit sensor /1 (PS6)
does not turn ON within a speci-
fied period of time after the paper
lift motor /1 (M7) turns ON.
The upper limit sensor /2 (PS13)
does not turn ON within a speci-
fied period of time after the paper
lift motor /2 (M8) turns ON.
The upper limit sensor /3 (PS114)
does not turn ON within a speci-
fied period of time after the paper
lift motor /3 (M124) turns ON.
The upper limit sensor /4 (PS123)
does not turn ON within a speci-
fied period of time after the paper
lift motor /4 (M125) turns ON.
The upper limit sensor (PS152)
does not turn ON within a speci-
fied period of time after the paper
lift motor (M151) turns ON.
Paper lift motor (M5) abnormality.
Shift motor (M4) abnormality.
Shift gate motor (M3) abnormality.
13. MALFUNCTION CODE
Resulting Estimated abnormal parts
operation
The main body Paper lift motor /1 (M7)
stops immedi- Upper limit sensor /1 (PS6)
ately to turn OFF Printer control board (PRCB)
the main relay
(RL1).
Paper lift motor /2 (M8)
Upper limit sensor /2 (PS13)
Printer control board (PRCB)
Paper lift motor /3 (M124)
Upper limit sensor /3
(PS114)
PC control board (PCCB)
Paper lift motor /4 (M125)
Upper limit sensor /4
(PS123)
PC control board (PCCB)
Paper lift motor (M151)
Upper limit sensor (PS152)
LU drive board (LTDB)
Paper lift motor (M5)
Shift motor (M4)
Shift gate motor (M3)
PC control board (PCCB)
319