Field Service Ver.2.0 Jan. 2007
3.2
Removal / Installation of Printer key control board
Back cover
Board cover
Align concave
areas
Image controller
Confidential – for internal use only, do not distribute
3. DISASSEMBLY / REASSEMBLY
1.
Turn the Sub and Main power switches OFF of
the main body, and unplug the power cord from
the outlet.
2.
Remove the back cover(6 screws).
3.
Remove the board cover(4 screws).
4.
Remove the image controller in the location with
the IC204 mark on the system control board.
NOTE
• You should be careful not to damage the
board.
• Remove the image controller pulling it per-
pendicularly to the system control board.
• Align the concave area on the left side of the
image controller and the concave area on left
side of the slot in the system control board
when installing.
• Assembly should be made in reverse order
from disassembly.
5