Finding the Copier IP Address on the bizhub 500/420/360 It will be necessary to have access to the copier IP address when either configuring the 500/420/360 onto a network or setting up a “one touch”. 1. Press Utility/Counter on control panel. 2.
bizhub 500 / 420 / 360 Book Copy Mode Choose book/booklet smaller than 8.5" x 11" which will illustrate the “erase non-image” functionality. Copy the front & rear covers and six book pages in the 1:2 duplex mode with 2 position staple. Important: The RADF must be positioned off the platen glass, in the extreme upward position.
Copying a Form Letter onto Letterhead Utilizing the Bypass Place an 8.5" x 11" original face up (portrait orientation) into the RADF 1. Place letterhead face down in the bypass, utilizing the opposite orientation as originals. 2. Press start key 3.
bizhub 500 / 420 / 360 Create 5.5"x 8.5" Booklet 1:2, Folded and Saddle Stitched Place eight 8.5" x 11" originals, 1:1, face up in RADF 1. Chose paper size (8.5" x 11" Landscape) 2. Folding automatically be activated.) 3. Press start key Print Out Comprehensive Meter Information The meter readings include data on copy, print, scan/fax output as well as duplex copies, # of Originals and maintenance information.
Image Insert When inserting an image into a finished set from a source such as a hard cover book or 3D object like a wristwatch, the image insert mode functionality works extremely well with these job requirements. Place eight 8.5" x 11" originals face up into the RADF. Have a hard cover book or magazine near by;...
bizhub 500 / 420 / 360 Program (above job) Combine Originals into Memory Mode Repeat the above job (step by step) of copying both sides of an ID badge onto an 8.5" x 11" and put job parameters into memory mode for future use. Please see previous Memory Mode job for step by step procedures.
bizhub 500 / 420 / 360 To Access the MFP 1. Touch Input 2. Enter the password (“x”) 3. Touch 4. Touch the Built-in Stamp and Set Numbering Stamp Size APPLICATION: The stamp size of built-in stamps and Set Numbering can now be change. This enhances the versatility of the existing functionality of built-in stamp and Set Numbering.
Creating a User Box In the above noted exercise User Boxes are created at the MFP control panel; without utilizing PageScope “Web Connection.” An optional HDD must be installed in the MFP in order to complete this exercise. APPLICATION: To be able to set up a user box at the MFP; scan a document to the user box and then retrieve the document at a later date.
bizhub 500 / 420 / 360 Delete document in public user box APPLICATION: In an era of “changing information” it is useful for the end-user to understand how easy it is to delete existing documents in the public user boxes. 1.
Configure the “Envelope Application” in the By-Pass APPLICATION: In order to feed envelops from the by-pass; the paper feed must be configured. Once the by-pass is configured to accept envelops; the envelops are placed in the by-pass flap up and short end inserted into by-pass. A maximum of no more then 10 envelopes can be placed into the by-pass feed system at any one time.