Konica Minolta bizhub 500 Service Manual page 499

2. PERIODIC CHECK
[13]
[12]
[16]
[17] [19]
[21]
6
[11]
4061f2c011na
[15]
[14]
4061f2c012na
[17]
[18]
4061f2c013na
[20]
4061f2c014na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
9. Shift the Shaft Assy [11] in the orienta-
tion as shown on the left, and remove
the C-ring [12] and the gear [13].
10. Remove the C-ring [14], the bearing
[15], and remove the shaft Assy [16].
11. Remove two C-rings [17] and the bear-
ing [18], and remove the Pick-up Roller
Fixing Plate Assy [19].
12. Remove the C-ring [20] and remove the
Feed Roller [21].
13. Repeat steps 1 to 12 similarly for the
Tray 4.