Maintenance Procedure Of The Transfer/Separation Corona Section; Replacing The Transfer/Separation Corona Unit - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007
3.8

Maintenance procedure of the transfer/separation corona section

3.8.1

Replacing the transfer/separation corona unit

A. Periodically replaced part/cycle
• Transfer/separation corona unit : Every 500,000 prints *1
*1 500/420
*2 360
B. Procedure
[3]
[1]
Confidential – for internal use only, do not distribute
: Every 450,000 prints *2
1.
2.
3.
4.
[2]
50gaf2c034na
Open ADU.
(See P.142)
Open the conveyance unit.
(See P.30)
Release the lock levers [1] and [2] and remove the
transfer/separation corona unit [3].
Reinstall the above parts following the removal
steps in reverse.
3. PERIODIC CHECK
37
1