Konica Minolta bizhub 500 Service Manual page 314

Field Service Ver.2.0 Jan. 2007
*8 Fusing temperature while in the low power
Set the fusing temperature while in the low power
mode.
*9 Dot diameter adjustment control
Change the timing when the dot diameter adjustment
is made.
*10 Foolscap size setting
Set the definition of the foolscap size.
Confidential – for internal use only, do not distribute
Mode
The fusing heater lamps /1 (L2) and /2
(L3) turn on when the thermistors /1
(TH1) and /2 (TH2) are respectively at
70 °C, and turn OFF when they are at
80 °C.
The fusing heater lamps /1 (L2) and /2
(L3) turn ON when the thermistors /1
(TH1) and /2 (TH2) are respectively at
120 °C, and turn OFF when they are at
130 °C.
The fusing heater lamps /1 (L2) and /2
(L3) turn ON when the thermistors /1
(TH1) and /2 (TH2) are respectively at
150 °C, and turn OFF when they are at
160 °C.
The fusing heater lamps /1 (L2) and /2
(L3) turn ON when the thermistors /1
(TH1) and /2 (TH2) are respectively at
70 °C, and turn OFF when they are at
80 °C.
Mode
The humidity is 60% or
more and the power
switch turns OFF for more
than 8 hours.
The power switch turns
OFF for more than 8
hours.
At all times
None
Mode
8 / x 13
1
2
8 / x 13
1
4
8 / x 13 /
1 1
8 4
8 x 13
10. SERVICE MODE
16-1 16-0
0 0
0 1
1 0
1 1
16-7 16-6
0 0
0 1
1 0
1 1
17-2 17-1 17-0
0 0 0
0 0 1
0 1 0
0 1 1
281
1