Running Mode - Konica Minolta bizhub 500 Service Manual

Field Service Ver.2.0 Jan. 2007

10.14.3 Running Mode

Conduct a continuous print operation test.
In this mode, the following items can be selected.
• Intermittent Copy Mode
The machine shifts into the ready condition after completion of the print operation of the set copy count and
conducts the same operation after waiting for 0.5 sec.
• Paperless Running Mode
In this mode, no paper is fed and none of the paper detection/jam detection is made while in the operation. The
print operation is made nearly at the same timing as the usual operation with no transfer/separation control
made. The machine shifts into the ready condition after completion of the print operation of the set copy count
and conducts the same operation after waiting for 0.5 sec.
• Paperless Mode
With no paper fed and none of the paper detection/jam detection made, the print operation is made nearly at
the same timing as the usual operation.
• Paperless Endless Mode
The operation is made with the set copy count automatically set with no limit. Like the paperless mode, the print
operation is made nearly at the same timing as the usual operation with no paper fed and none of the paper
detection/jam detection made.
• Progress Running Mode
The combined operation of the paperless endless mode plus the scan operation and the stepped change of the
auto paper feed is made. This is not use in the field.
A. Procedure
1.
"Service Mode screen"
Press [Test Mode].
2.
"Test Mode screen"
Press [Running mode].
3.
"Running Mode screen"
Press [Intermittent Copy] to [Paperless Endless] and select a test mode to be conducted.
4.
Press the Start key to start the running test.
5.
Press the Stop key to stop the running test.
6.
Turn off and on the power switch (SW2) to exit the running test mode.
Confidential – for internal use only, do not distribute
10. SERVICE MODE
297