Replacing The Separation Roller Assy - Konica Minolta bizhub 500 Service Manual

3. PERIODIC CHECK
3.13.2

Replacing the separation roller assy

A. Periodically replaced part/cycle
• Separation roller assy
*1 500/420
*2 360
Note
• When replacing the separation roller assy, be sure also to replace the feed roller at the same time.
B. Procedure
[2]
66
1
: Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
[2]
[2]
[1]
50gaf2c004na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
1.
Remove the bypass unit.
(See P.63)
2.
Remove the 2 springs [1].
3.
Remove the 5 screws [2].