Konica Minolta bizhub 500 Service Manual page 519

2. PERIODIC CHECK
[12]
[15]
[13]
[17]
6
[10]
[11]
4061f2c210na
[13]
[14]
4061f2c211na
[16]
4061f2c212na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
9. Shift the Shaft Assy [10] in the orienta-
tion as shown on the left, and remove
the C-ring [11] and the gear [12].
10. Remove the Shaft Assy [10].
11. Remove two C-rings [13] and the bear-
ing [14], and remove the Pick-up Roller
Fixing Plate Assy [15].
12. Remove the C-ring [16] and remove the
Feed Roller [17].