Konica Minolta bizhub 500 Service Manual page 293

10. SERVICE MODE
<POP3 port number>
Functions • To set the POP3 port number used for the CS Remote Care.
Use • To set the port number for the POP3 server.
Setting/ • The default setting is 110.
Procedure
(2) Receive
<E-mail Address>
Functions • To set the e-mail address used for the CS Remote Care.
Use • To set the e-mail address.
Setting/ • The default setting is No.
Procedure • Up to 129 characters (alphanumeric characters and symbols) can be used.
<Mail Check>
Functions • To set whether or not to use Mail Check and the time interval for the POP server
used for the CS Remote Care.
Use • To set whether or not to use Mail Check and the time interval for the POP server
used for the CS Remote Care.
• To change the time interval for Mail Check.
Setting/ • The default setting is No.
Procedure
<Connection timeout>
Functions • To set the timeout period for connection during reception.
Use • To change the timeout period for connection during reception.
Setting/ • The default setting is 60 Sec.
Procedure
<APOP Authentication>
Functions • To set whether or not to authenticate the APOP during reception.
Use • To authenticate the APOP during reception.
Setting/ • The default setting is No.
Procedure
260
1
"No" (1 to120 min., No)
"60 Sec" (30 to 300 Sec)
Yes
Confidential – for internal use only, do not distribute
"110" (1 to 65535)
"No"
Field Service Ver.2.0 Jan. 2007