Isw; Network Fax Setting - Konica Minolta bizhub 500 Service Manual

10. SERVICE MODE

10.12.4 ISW

For particulars, see "5. FIRMWARE VERSION
(See P.101)
10.12.5 Option
Let the main body recognize the installing condition of the optional HDD and FAX.
A. Procedure
1. "Service Mode screen"
Press [System 2].
2.
"System Input screen"
Press [Option].
3.
"Option screen"
Press [Installed] or [Not Installed] to select the installation or non-installation of the HDD and FAX.
4.
Press [OK].

10.12.6 Network FAX Setting

Sets to use the network FAX.
• At this moment on January 2007, "SIP FAX" is unavailable.
A. Procedure
1.
"Service Mode screen"
Press [System 2].
2.
"System Input screen"
Press [Network FAX Setting].
3.
" Network FAX Setting screen"
Press either [ON] or [OFF] to choose whether to use the network FAX (IP address FAX / SIP FAX / Internet
FAX) or not.
NOTE
• When it is set to "ON", you can choose whether to use or not by performing the following set-
ting.
• [Administrator Setting] → [Network Setting] → [Network FAX Setting] → [Network FAX Function
Settings]
4. Press [OK].
286
1
UP".
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007