Konica Minolta bizhub 500 Service Manual page 145

5. FIRMWARE VERSION UP
E. Rewriting of firmware
(1) Relationship between the ISW and the display of the operation panel
When the ISWTrns starts up, the main screen is displayed. In the main screen, the transmission file (firmware) is
selected, the information is diplayed, the checksum and the transmission file are sent out. For detailed informa-
tion of the functions, refer to the following.
[1]
[1] File status information list
View detailed information about the version file when select firmware.
[2] Select type frame
Select condition for a transfer file. When selecting all of the 4 types of the combo boxes, a folder [4] is set
from the information set in the ISWTrns.INI file. The setting of the selected combo boxes are saved to the
ISWTrns.INI file and it is display initially when it is started next time.
[3] Version selection frame
This frame let you select which version of a transfer file you want transmitted when more than one version is
stored in a folder.
[4] Version storage folder edit box
When the select type frame of [2] is decided, a folder name is displayed in full path from the information of
the data folder set in the option window and the INI file. When the firmware is in a folder other than the
specified data folder, this can be changed by clicking [Browse] [6] to specify the file location or entering
directly the file location. A firmware corresponding to the INI file conditions in the folder shown here is dis-
played in the list box of [5].
[5] Version file selection list box
Displays files that is in the folder selected at [4]. When more than one version files are stored in the same
folder, all versions are displayed in this list box. The list displayed here is sorted in the order of names, and
an item displayed last is selected when the list is displayed. Changing the selected item decides a firmware
version to be transmitted.
[6] Version file [Browse]
This key is used when the firmware is in a folder other than the specified data folder. Display the folder
selection screen to select the folder of [4].
[7] Send file information frame
Display the list of firmware to be actually transmitted based on the information selected in the frames [2] and
[3], and click [FileCheck] [9] to display the checksum of the file and the consistency (OK, NG, ??) of the
checksum.
[8] Send file information display list
When version files are selected at [5], files to be actually transmitted are displayed. The number of files actu-
ally transmitted is described in the checksum attached to the firmware.
Click [FileCheck] at [9] to calculate the checksum of the entire displayed files. And compare the obtained
value with the checksum value stored in the checksum file (*.sum) attached to the firmware to display the
result.
112
Confidential – for internal use only, do not distribute
[3]
[2]
[7]
[8]
Field Service Ver.2.0 Jan. 2007
[4]
[5]
[6]
[9]
[10]