Konica Minolta bizhub 500 Service Manual page 614

Field Service Ver.1.0 Feb. 2006
(4) Shift operation mode
Output check switch /1 : ON
Output check switch /2 : ON
(5) Alignment plate operation mode
Output check switch /1 : ON
Output check switch /1 : ON
Output check switch /1 : ON
Output check switch /1 : ON
Output check switch /1 : ON
(6) Stapler unit CD moving mode
Output check switch /1 : ON
Output check switch /1 : ON
Confidential – for internal use only, do not distribute
The main tray shifts to the front side.
• The shift motor (M8) turns ON.
The main tray shifts to the rear side.
• The shift motor (M8) turns ON.
The alignment plate moves to the home position for
the 1st time.
The alignment plate moves to the A4 alignment posi-
tion for the 2nd time.
The alignment plate moves to the 8
position for the 3rd time.
The alignment plate moves to the A4S alignment
position for the 4th time.
The alignment plate moves to the 8
position for the 5th time.
The stapler unit moves to the home position for the
1st time.
The stapler unit moves to the A4 corner for the 2nd
time.
3. MECHANICAL ADJUSTMENT
/ x 11 alignment
1
2
/ x 11S alignment
1
2
21