Field Service Ver.1.0 Feb. 2006
ADJUSTMENT/SETTING
4. MECHANICAL ADJUSTMENT
4.1
Adjusting the tilt of the lift plate
When the lift plate is tilted, paper may not be fed correctly. Adjust the lift plate so that it becomes parallel to the
paper feed roller shaft. When replacing the wire, be sure to conduct this adjustment.
A. Procedure
[1]
Confidential – for internal use only, do not distribute
1.
Remove the right cover and the front cover.
(See P.11)
2.
Loosen the screw [1].
16aaf3c001na
4. MECHANICAL ADJUSTMENT
21