Konica Minolta bizhub 500 Service Manual page 347

12. JAM CODE
Classification Jam code
DF J-6514
J-6515
J-6601
J-6602
J-6603
J-6604
J-6605
J-6606
314
1
Cause
While in the idle, any of the original
registration sensor (PS9), the original
detection sensor (PS8) or the original
exit sensor (PS10) is ON.
While in the idle, any of the original
feed sensor (PS6), the original regis-
tration sensor (PS9), the original
detection sensor (PS8) or the original
exit sensor (PS10) is ON.
While in the single sided mode, the
original exit sensor (PS10) does not
turn ON within a specified period of
time after the original coveyance
motor (M2) turns ON.
When feeding the first original in the
mode other than the single sided
mode, the original exit sensor (PS10)
does not turn ON within a specified
period of time after the original covey-
ance motor (M2) turns ON.
When feeding the second original in
the mode other than the single sided
mode, the original exit sensor (PS10)
does not turn ON within a specified
period of time after the original covey-
ance motor (M2) turns ON.
When feeding the third original in the
mode other than the single sided
mode, the original exit sensor (PS10)
does not turn ON within a specified
period of time after the original covey-
ance motor (M2) turns ON.
While in the single sided mode, the
original exit sensor (PS10) does not
turn OFF within a specified period of
time after the PS10 turns ON.
When feeding the first original in the
mode other than the single sided
mode, the original exit sensor (PS10)
does not turn OFF within a specified
period of time after the PS10 turns
ON.
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
Resulting Correction
operation
The DF stops Open the open/close
immediately. If cover and remove
there is paper jammed paper if any.
being trans-
ferred or having
been trans-
ferred, the main
body completes
the paper exit
before stopping
operations.