Konica Minolta bizhub 500 Service Manual page 605

2. OTHERS
[9]
[10]
12
[13] [14]
[12] [11]
4521f2c010na
Confidential – for internal use only, do not distribute
Field Service Ver.1.0 Feb. 2006
Note
• When installing the punch unit, be sure to set
the gear [9] of the main body to the gear [10]
of the punch unit, and then insert the shaft
[11] into the hole [12] of FS.
• When engaging the gears, be sure to engage
them so that the gear flange [13] of the main
body comes inside the gear flange [14] of the
punch unit.
4.
Reinstall the above parts following the removal
steps in reverse.