Konica Minolta bizhub 500 Service Manual page 83

3. PERIODIC CHECK
[2]
[5]
[4]
[6]
[3]
50
[1]
[8] [7]
[3]
50gaf2c161na
[4] [1]
[2]
50gaf2c162na
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
7.
Remove the C-ring [1] and then remove the bear-
ing [2].
8. Detach the hook [4] of the spring [3] from the
oblong hole [5].
9.
Remove the bearing [6] and then remove the
paper feed roller unit [7].
Note
• When attaching the spring, be sure to put the
hook into the oblong hole (not into the round
hole [8]).
10.
Remove the E-ring [1] and then remove the bear-
ing [2].
11.
Remove the bearing [3] and then remove the feed
roller assy [4].