5. FIRMWARE VERSION UP
5.4
Internet ISW Setting
•
By using this setting, the Firmware stored in the Server can be downloaded over internet for upgrading.
5.4.1
Internet ISW Set
Functions
• To set whether or not to enable each setting for Internet ISW.
Use
• To use when upgrading the Firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
Note
• When the following setting is set to "ON", this setting will automatically be
set to "OFF" and cannot be changed.
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
Setting/
• The default setting is "OFF".
Procedure
5.4.2
HTTP Setting
•
It will be displayed only when [Internet ISW Set] is set to "ON".
A. Data Input Setting
Functions
• To set whether or not to enable downloading using the HTTP Protocol.
Use
• To use when accessing the Server using the HTTP Protocol.
• Setting on the Proxy Server will be valid when this setting is "ON".
Setting/
• The default setting is "OFF".
Procedure
B. Connect Proxy
Functions
• To set whether or not to connect via Proxy Server when accessing the Server.
Use
• To use when accessing the Server via Proxy Server.
Setting/
• The default setting is "OFF".
Procedure
C. Proxy Server
Functions
• To set the Address and the Port Number for the Proxy Server.
Use
• To use when accessing the Server via Proxy Server.
Setting/
<Server Address>
Procedure
• Enter the IP Address using the Version 4 method or FQDN method.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
128
1
ON
ON
ON
Confidential – for internal use only, do not distribute
Field Service Ver.2.0 Jan. 2007
"OFF"
"OFF"
"OFF"