Peer-To-Peer Printing Program (Windows); Installing The Ip Peer-To-Peer Printing Program - Minolta PI4700E User Manual

3
3.4

Peer-to-Peer Printing Program (Windows)

Peer-to-Peer Printing Program is a Windows utility that lets you output di-
rectly to a printer from a computer on a network, without going through a
server.
Use this program for peer-to-peer printing under TCP/IP.
Requirements
G
Computer must have TCP/IP installed and enabled.
G
Network Card must have valid IP parameters assigned.
Note
Refer to the applicable Windows documentation for information about
installing TCP/IP under Windows.

Installing the IP Peer-to-Peer Printing Program

Use the following procedure to install the IP Peer-to-Peer Printing Pro-
gram.
1
Load the CD-ROM into the CD-ROM drive of the computer you want
to use.
2
Start Setup.exe
3
Follow the instructions that appear on the screen to complete the in-
stallation.
The default installation directory is
change this to any other directory during the installation procedure.
Note
The message
add new Peer to Peer IP
of the installation procedure. The installation procedure does every-
thing required to install the program correctly, so simply click
clear this message.
3-8
Peer-to-Peer Printing Program (Windows)
in the lp-p2p folder on the CD-ROM.
C:\Program
Use the Add Printer Wizard in the Printer Group to
Printers. appears on the screen at the end
Files\Ip-p2p. You can
OK to
Pi4700e