Table of Contents
Advertisement
9
Important!
You must provide information for the
ply Address
cannot be sent if these settings are left blank.
SMTP Server Address
Default Subject for E-mail
Attachment
Default Subject for FTP
Notification
Reply Address
SMTP Connection Time-
out
Default Compression
Note
If you haven't logged on in Admin mode, "***" appears as the IP ad-
dress in
FTP Proxy Configuration Section
FTP Proxy Server Address
Remote Port Number of
Proxy
Apply button
Clear button
9-8
when you are using the Send to E-mail function. E-mail
Type in the IP address of the SMTP server.
Type in the default subject when distributing scanner data as
E-mail attachments.
Type in the default subject when informing by E-mail the URL
of the FTP site where scan data is left.
Type in the mail address for a mail replay showing the error
message when a send error is generated.
Input the SMTP server connection timeout in seconds. You can
input a value from 1 to 120 seconds.
Select the default compression method to be used when dis-
tributing scanned data as direct mail.
SMTP Server Address
Type in the IP address of the FTP proxy server.
Type in the proxy port number. You can input a value from 1 to
65535.
Click this button to apply any settings you have input up to this
point.
Click this button to cancel any settings you have input up to this
point.
SMTP Server Address
and
FTP Proxy Server
Network Setting
and
Re-
Address.
Pi4700e
Advertisement
Table of Contents
Troubleshooting
