5
5.2
Printer setting with X window System
Making general settings before using the printer
The printer driver requires setting of items that are common to all print
jobs, including the port to which the printer cable is connected and any op-
tional devices configured with the machine: Note that these settings must
be made only after the printer driver has been installed.
See page 5-19 if you refer to Device Options Setting in dialog box.
Redhat Linux
With Redhat Linux, setting is performed from
control panel. The following shows how to display
Tip
With Redhat Linux,
played by executing
1
Click menu button and open
2
When control panel is opened, click the
Printer system manager will open.
3
First, click the
5-4
Printer setting with X window System
Printer Configuration
printtool
command from Terminal window.
System
Add
button of the printer manager.
Printer Configuration
Printer
Configuration:
window can also be dis-
–
Control
Panel.
Printer Configuration
in the
button.
Pi4700e