Minolta PI4700E User Manual page 69

3
3
Click Next
4
On the
option, and then click Next.
5
On the Locate Your Printer
the Internet or your intranet
6
Type the IPP printer's URL into the
then click Next.
http://<IP address of the printer>:631/nic/Print
(Example) When the IP address of the Digital Copier is 192.9.200.200:
http://192.9.200.200:631/nic/Print
7
Click OK
8
In the
Manufacturers
use, and then click OK.
If the name of the printer you want to use does not appear in the lists,
load the Printer Drivers CD-ROM that comes with your Digital Copier
into your computer's CD-ROM drive and then click the Have Disk but-
ton. Next, specify the location of the printer's INF file on the CD-ROM.
9
Select whether you use this printer as the default printer or not, and
then click Next.
10
Click Finish
11
Click the icon of the newly added printer to select it, and then click
Properties
12
Display the
13
If the test prints normally, complete the procedure by clicking
close the
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 2000/XP systems are configured the same way as de-
scribed above.
3-22
on the introduction page of the wizard.
Local or Network Printer
on the confirmation dialog box that appears.
and
Printers
to exit the wizard.
on the File menu.
General tab and then print a test page.
Properties dialog box.
page, select the
page, select the Connect to a printer on
option.
URL field as shown below, and
lists, select the printer you want to
IPP Printing
Network printer
OK to
Pi4700e