4
Tips for (5)
If you output prints to the Elevator Tray when the Single-staple Finish-
er, Multi-staple Finisher or Mailbin Finisher is installed, the prints are
output in a sawtooth manner.
When the Folding Finisher is installed or if none of the finishing options
is installed, the prints are output in a criss-cross manner.
The following are the minimum requirements for permitting criss-cross
sorting using the Collated setting:
Stacks of paper of the same size are loaded in the lengthwise
and crosswise directions.
The Staple, Punch or Cover mode is not set.
When
Collated
Tip for (6)
A Portrait or Landscape print appears on the Page Layout.
4-18
is selected,
Sorting
is dimmed.
Paper tab
Pi4700e