Setup Tab - Minolta PI4700E User Manual

Properties settings

Setup tab

This tab allows you to set the paper take-up tray, paper exit tray and var-
ious high grade printing functions.
(1)
(2)
(1) Paper Source
Selects the machine tray to be used.
Sets the cover page function and the OHP interleaving function.
• Paper Source
• Detail of Paper Source
(2) Output Setting
This function selects the tray in the machine to which the paper is to be exited.
Settings can also be made for finishing functions including stapling, hole punching,
and folding.
• Paper exit destination
• Mailbin paper exit desti-
nation
• Detail of Output Setting
(3) Duplex <when Dup + 2way Tray, Dup + LCC or Duplex Cabinet is installed>
Specifies two-sided printing.
• Off
Pi4700e
Select the machine tray to be used.
The selectable paper sizes are limited by the types of
paper take-up trays installed in the machine.
Available settings: Auto, Manual Feed, Tray1 to 4,
LCC, LCT
Set the cover page function and OHP interleaving func-
tion. For details, see page 5-26.
Select the machine tray to which you wish to exit the
prints.
The selectable paper exit trays are limited by the type
of finisher installed in the machine.
Mailbin Finisher: Auto, Mailbin
Excepting Mailbin Finisher: Auto
If Mailbin is selected as the paper exit destination, set
the mailbin to which you wish to exit the paper.
Set stapling, punching or folding. For details, see
page 5-28.
Not set
5
(3)
(4)
5-23