Table of Contents
Advertisement
1.
PROBLEMS WHILE PRINTING FROM A COMPUTER
1-1.
Computer printing problems
Num-
Symptom
ber
1
The printing
The application
position does
paper and print set-
not match
tings are incorrectly
the previ-
specified.
ously used
printer.
The paper that is
being used does not
meet the specifica-
tions for the printer.
2
Only some of
The binding margin
the pages
is incorrect.
were printed,
or the data
for one page
was printed
on two
pages.
3
The left side
The paper position
of the page is
shifted.
blank. (The
text is only
printed on
the right side
of the paper.)
4
Text different
The printer is not set
from the text
to the settings most
in the screen
appropriate for the
was printed.
computer environ-
ment.
The interface cable
is not correctly con-
nected.
A printer buffer or a
switch is being used.
Possible Cause
Check the instruc-
tion manual for the
application, and
then correctly
specify the set-
tings.
Refer to "Paper
Tab" in the Printer
Controller User
Manual, and then
check the paper.
Check the print
area.
• Correctly load
the paper.
• Check the mar-
gin settings
specified in the
application.
Specify the appro-
priate printer set-
tings.
Check that the
cable is correctly
connected to the
copier and the
computer.
Change the con-
nections so that a
printer buffer and
switch is not being
used.
T-1
Remedy
Description
Depending on the soft-
ware, if the settings are
incorrect, even by a small
amount, the printing posi-
tion may be shifted.
With this unit, paper is fed
by the friction of rollers.
Due to this, there may be
slight errors in the hori-
zontal and vertical direc-
tions. These errors differ
depending on the paper.
Advertisement
Table of Contents
