8
Novell NetWare Settings
This section explains the contents of the Print Server Settings dialog box.
Print Server Settings
settings for both to configure a Network Card for Novell NetWare. Each
screen lets you set up your version of Novell Netware for the Network
Card, including directory and bindery services.
G
Print Server Name
Specifies the NetWare print server name. This name is used when the
Network Card logs into NetWare. Make sure the name you input is dif-
ferent from anything in the network directory and server bindery. This
field accepts input of up to 48 characters.
G
Print Queue Scan Rate
Specifies the rate when the Network Card polls the print queue. Spec-
ifying 1 for this field, for example, polls for a new print job once every
second. You can specify a value within the range of 1 to 250.
G
Print Server Password and Print Server Password Retype
Specifies the password when the Network Card logs into NetWare.
Changing the contents of this field changes the password for both Net-
Ware and the Network Card. This field accepts input of up to 32 char-
acters. This dialog box does not close if the contents of the
and
Password Retype
8-40
has two screens for setting, and you must input
fields are not identical.
Using the utility software
Password
Pi4700e