Installing The Printer (Windows Nt 4.0) - Minolta PI4700E User Manual

3

Installing the printer (Windows NT 4.0)

1
On the
2
Double-click
the default printer.
See "2 Installing the Printer Driver" (p. 2-1) for details about how to in-
stall it.
3
Right-click the new printer icon and select
4
Display the
5
Click Add
This displays a list of enabled port types.
6
Select LPR Port
7
On the Add LPR compatible printer dialog box, type the IP address of
the Network Card into the
box.
If the network you are on uses DNS (Domain Name Services), type in
the DNS name instead of the IP address.
8
Type PORT 1
box, and then click
9
Click the
the OK
10
Right-click the printer icon again to display its Properties dialog box,
display the
11
If the test prints normally, complete the procedure by clicking
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows NT 4.0 systems are configured the same way as de-
scribed above.
3-18
Start menu, point to
Add Printer and install the printer. Make the new printer
Ports tab.
Port.
and then click
Name or address of server providing lpd
into the Name of printer or print queue on that server
OK to close the dialog box.
Close button of the Printer Ports dialog box, and then click
button of the Properties
General tab, and then print a test page.
Settings and then click Printers.
Properties
New Port.
dialog box to close it.
LPR Printing
from the menu.
OK to
Pi4700e