8
6
Select the printer driver for each client operating system.
❍
When users install this printer, these drivers will be automatically
downloaded to their workstations.
❍
If the driver you need is not listed, rather than adding the driver to
the RMS, you can choose
then be asked to provide a disk with the appropriate driver the first
time they install this printer on their workstations.
7
Click Continue.
The new Printer Agent will now appear in the
dow.
Converting Public-Access Printers to Controlled-Access Printers
To take full advantage of the security and management features provided
by NDS, you may want to convert public-access printers to controlled-ac-
cess printers.
For example, if you have used a third-party gateway to get a printer up and
running immediately (plug-and-print), the gateway automatically creates a
public-access printer. Later, you may want to convert that printer to a con-
trolled-access printer. The following procedure explains how to convert a
public-access printer to controlled-access.
Prerequisites
To create a controlled-access printer on your network, you must meet the
following prerequisites:
✔
Have at least Read, Write, Modify, and Create privileges for the desti-
nation container where its associated Printer object will reside
✔
Be designated as a manager of the NDPS Manager that will control
this Printer Agent
✔
Have a Broker running
✔
Have an NDPS Manager object
✔
Have a public-access printer created
1
In NetWare Administrator, select the container where you want the
printer to reside.
2
Choose
This causes the Create NDPS Printer dialog box to appear.
3
Type a name in the
4
In the
Printer Agent Source
8-24
Object
—
Create
—
Printer Name
NetWare configuration
None
from the top of each list. Users will
Printer Agent List
NDPS
Printer.
field.
field, select
Public Access
win-
Printer.
Pi4700e