Minolta PI4700E User Manual page 266

Using the utility software
4
On the
❍
Selecting this Network Card on the
the
tions. A command is appears dimmed on the
it is not available for some reason.
Configuration
Selecting Configuration
changing the Network Card device name and AppleTalk zone.
1
To change the device name, input the new name into the
Name field.
2
To change the AppleTallk zone, use the
down menu to select the zone you want.
Note
You cannot change the zone on a network that does not have any
zones.
3
After making the settings you want, click the
4
To enable the new settings, power the printer down and then back up
again. You can then check the settings on the status sheet.
Error Log
The error log function can be used to reference the event log stored on the
Network Card. The error log is referenced whenever a Network Card prob-
lem occurs.
Selecting Error Log
can save the error log as a text file by selecting
You can also print out log contents by selecting
Pi4700e
Device display panel, select this Network Card.
Options menu bar, which you can use to select various func-
on the
on the Options menu displays error log contents. You
Device display panel enables
Options
Option menu displays a dialog box for
AppleTalk Zone
OK button.
Save As
Print
8
menu when
Printer
field pull-
on the File menu.
on the File menu.
8-35