Ldap Setting - Minolta PI4700E User Manual

9

LDAP Setting

LDAP Function
LDAP Server Address
Port Number
Search Root
Search Timeout(s)
Max hit of Number
Anonymous Login
Login Name(Dn)
Password
Check LDAP settings
9-10
Use this setting to turn LDAP search on or off.
The setting you make here does not go into effect until you turn
the copier off and then back on again.
The initial default setting is OFF.
Input the LDAP server address.
The initial default setting is blank.
Only an IP address can be typed in.
Enter the LDAP server port number.
The initial default setting is 389.
Input the search start point.
The initial default setting is blank.
Input a timeout value (seconds) for LDAP communication.
The initial default setting is 60 seconds.
Input a value that specifies the maximum number of hits that
can be accepted for LDAP search results.
The initial default setting is 100.
Selecting this check box enables configuration of anonymous
login settings.
Anonymous Login
If the
and Password become unavailable.
Input the user name.
Input the password.
Click this button to check whether the server can be accessed
(logged into) using the currently configured settings.
If the server is accessed but the settings are incorrect, an error
appears.
Refer to the "Error List" on page 11-6.
Network Setting
Login Name
check box is selected,
Pi4700e