9
9.2
Network Setting
Accessing to PageScope Light
PageScope Light for Pi4700e can be accessed directly from a Web
browser.
1
Start the Web browser.
2
In the URL field, enter the IP address of the printer controller as shown
below.
http://<IP address of printer controller>/
(Example) When the IP address of the printer controller is
192.9.200.200:
http://192.9.200.200/
3
This causes PageScope Light for Pi4700e screen to appear.
Operation
PageScope Light for Pi4700e operation is identical to that for Internet Web
pages. Clicking a hot link jumps to the link destination, and the
buttons scroll through pages backwards and forward.
Forward
Logging In to the Admin Mode
After you log in to PageScope Light in the Admin Mode, you can change
the configuration of the Digital Copier settings.
1
Type the administrator password into the
initial default administrator password is sysadm. See "Preference"
(p. 10-6) for information about how to change the password.
2
Click the
3
When you want to log out, click the
9-6
Log-in
button to log in to the Admin Mode.
Network Setting
Admin Password
Log-out
button.
Back
and
box. The
Pi4700e