8
4
At the
Printer Agent Source
and click the
This causes the Create Printer Agent dialog box to appear.
5
Confirm the Printer Agent name (default is the name of the new printer
you are creating) and browse to select the NDPS Manager you want
to assign it to.
6
In the
Gateway Types
The Novell PDS dialog box opens.
7
Configure the Novell PDS by selecting the Printer Type and Port Type.
Then click the
This starts the
8
Configure the Connection Type as
Next
button.
9
Specify the IP address of your host and click the
10
Select the printer driver for each client operating system.
❍
When users install this printer, these drivers will be automatically
downloaded to their workstations.
❍
If you choose a Windows 3.x driver but not a Windows 95 or Win-
dows NT driver, a 16-bit driver will be selected. Normally this does
not create problems.
❍
If the driver you need is not listed, rather than adding the driver to
the RMS, you can choose
then be asked to provide a disk with the appropriate driver the first
time they install this printer on their workstations.
11
Click the
The main browser window appears with your new controlled-access
printer listed.
8-22
field, select
Create
button.
window, select the
OK
button.
Configure Novell Port Handler
None
Continue
button.
NetWare configuration
Create a New Printer Agent
Novell Printer
configuration wizard.
Remote
(LPR on IP) and click the
Finish
from the top of each list. Users will
Gateway.
button.
Pi4700e