Minolta PI4700E User Manual page 78

Specifying network settings from PageScope Light
IPP Configuration
This screen appears when you click the
Network tab. It lets you change Internet Printing Protocol (IPP) settings.
You can configure the printer functions that are controlled by IPP and the
printer information that can be seen from IPP clients.
Note
Standard access for IPP printing is:
http://<IP Address>:631/nic/Print
For details about IPP printing, see "8 Network Interface Card".
Password
Enable IPP
Pi4700e
IPP Configuration
Input the password assigned to the network interface card. The
initial factory default is sysadm. Clicking the
inputting the wrong password displays a password error mes-
sage without changing the settings.
Check this option to enable IPP on the network interface card.
You cannot use IPP print unless this option is checked.
3
menu on the
Apply button after
3-31