Dec Ultrix 4.3 - Minolta PI4700E User Manual

12
9
Next, input the following to kill all your lpd/lpr processes.
kill -9 <Process ID>
This stops all printing.
10
Next, type the following to restart the daemon.
/usr/lib/lpd
11
This completes installation. In response to the message about wheth-
er you want to install another printer, input
.
Enter
Ping the Network Card to test communication.

DEC ULTRIX 4.3

1
Type the following to run the installation script:
nicinst
The script automatically downloads the appropriate Network Card util-
ities for your system and displays questions to prompt you for the in-
formation it needs.
2
What is the node name of the Print Server Unit?
Input the host name recorded in /etc/hosts. For example, type
fast and then press
3
What is the printer name?
Type the printer name and press
4
Here, the script displays the information you have input up to this point.
Node name of the Print Server Card: printfast
Printer name to be used: <printer name>
The printer is attached on: PORT 1
Check these settings and make sure they are correct. If they are cor-
rect, type
5
Is this printer PostScript?
Type yes
wise type
12-44
.
Enter
yes and press
Enter
and press if the printer is a PostScript printer. Other-
Enter
no and press .
Enter
UNIX Configuration
yes or no
.
Enter
. Otherwise, type no
and then press
print-
and press .
Enter
Pi4700e