Minolta PI4700E User Manual page 184

Print options
• Half Folding + Staple
• Half Folding + Punch
• Half Folding + Staple,
Punch
• Z-folding
• Z-folding + Corner Sta-
ple
• Z-folding + Long Edge
Staple
• Z-folding + Punch
• Z-folding + Corner Sta-
ple, Punch
• Z-folding + Long Edge
Staple, Punch
(11) OHP Interleaving
Select whether to insert a sheet of paper between sheets of OHP transparencies on
which prints have been made.
• Off
• Tray1 to Tray4, LCC,
LCT
(12) Front Cover Page
Lets you use paper for the cover of a different type (such as colored paper) from that
for the text pages of your copy sets.
• Off
• Manual Feed, Tray1 to
Tray4, LCC, LCT
Note for (8)
If the Folding function is to be used, turn Off
ple setting under Folding.
If Staple
The stapling position may be at the upper left or upper right corner de-
pending on the orientation of the paper and printing.
If the number of sheets of paper exceeds the limit that the Multi-staple
Finisher, Single-staple Finisher or Mailbin Finisher can handle, the
stapling function may be canceled. For details, see the machine User
Manual.
If the original document for a print job contains a page of a different
size from the others and this document is printed, the Staple setting
may be canceled.
If the original document for a print job contains a page with a different
orientation from the others, care should be used because the stapling
position is determined according to the direction of the first page.
It is possible that an option cannot be selected because of the paper
size. For details, see the User Manual of the machine.
Pi4700e
Folds printed pages in two and staples them together.
Folds printed pages in two and punches holes in them.
Folds printed pages in two, staples them together, and
punches holes in them.
Folds printed pages into three parts.
Folds printed pages into three parts and staples them
at the corner.
Folds printed pages into three parts and staples them
together.
Folds printed pages into three parts and punches holes
in them.
Folds printed pages into three parts, staples them at
the corner, and punches holes in them.
Folds printed pages into three parts, staples them to-
gether, and punches holes in them.
Does not perform OHP Interleaving.
Specify the paper source for the interleaves.
Feeds paper for all pages of your copy sets from the
paper source specified in Paper Source.
Specify the paper source for the cover.
is set, printed pages are fed out into the Elevator Tray.
Staple and make the Sta-
6
6-29