Table of Contents
Advertisement
10
G
Hard Disk
It shows the status of the hard disk installed on the printer controller. This
information is not displayed when there is no hard disk installed on the
printer controller.
G
ROM Version
It shows version of firmware installed on the Digital Copier and printer con-
troller.
G
Interface Info
It shows information about network interface and local interface.
G
Consumable
It shows the current status of Digital Copier consumables.
➂ ➂ ➂ ➂ Preference
The environment settings such as the refresh rate time and the system
language can be specified.
➃ ➃ ➃ ➃ Save Setting
This screen appears when you click the
tem
tab. You can use the screen that appears to save the Digital Copier
setup to a file. Note that only settings you can make with PageScope Light
are saved to the file. Saved setups can be recalled to set up the Digital
Copier when required.
➄ ➄ ➄ ➄ Online Assistance
Enter information concerning product support and check it when neces-
sary.
10-6
Save Setting
menu on the
System tab
Sys-
Pi4700e
Advertisement
Table of Contents
Troubleshooting
