Windows NT 4.0
Displaying a Properties dialog box
There are two different steps to take to display a properties dialog box.
The contents of a particular properties dialog box slightly differ depending
on how you access it. Select the appropriate one according to your need.
(1) To display a properties dialog box from the Printers window
(2) To display a properties dialog box from an application menu
Below are the detailed procedures for each approach.
Displaying a Properties dialog box from the Printer Folder
1
Click the
2
Click the appropriate printer icon (ex. Minolta Di470 PCL6).
3
<To display the General tab>
Select
Properties
4
<To display Printing Preferences dialog box>
Click
Document Defaults...
It allows you to set the environment in which you will use the printer. The
settings made through this method are valid in all applications.
Displaying a Properties dialog box from an Application Menu
As an example, the procedure for the PCL6 printer driver is described be-
low.
1
Select
Print...
2
Make sure that the
Di470 PCL6
pear, select
3
Click the
This method allows you to set the number of copies and paper for each
document.
Note that the settings made on the properties dialog box accessed
through the application are valid only for that particular application.
Pi4700e
Start
button and select Settings. Then, click Printers.
from the
File
from the
from the
File
menu of the application.
Name
of
Printer
is not listed, click M and, from the menu that will then ap-
Minolta Di470
PCL6.
Properties
button. This shows the properties dialog box.
menu.
File
menu.
is
Minolta Di470
2
PCL6: If
Minolta
2-21