Minolta PI4700E User Manual page 67

3
9
On the
and then click Settings.
10
On the Configure Standard TCP/IP Port Monitor dialog box, select
LPR from the
11
Type PORT1
box, and then check the
12
Click OK
page.
13
Click Next
14
Click the
the Apply
15
Display the
16
If the test prints normally, complete the procedure by clicking
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 2000/XP systems are configured the same way as de-
scribed above.
3-20
Additional Port Information Required
LPR Settings
in the name of the queue you want into the
LPR Byte Counting Enabled
to return to the Additional Port Information Required
to display the next wizard page, and then click Finish.
Close button of the Printer Ports dialog box, and then click
button of the Properties dialog box.
tab, and then print a test page.
General
page, select Custom,
box.
LPR Printing
Queue Name
check box.
OK to
Pi4700e