Minolta PI4700E User Manual page 122

Installing the printer driver
After installation is complete, the screen shown below will appear.
If an error is output during installation, execute the following commands in
sequence:
# rpm -ivh diutil_pack_file --nodeps
# ln -s /usr/lib/libtcl8.0.so /usr/lib/libtcl.so
# ln -s /usr/lib/libtk8.0.so /usr/X11R6/lib/libtk.so
# ldconfig -n /usr/lib/
# ldconfig -n /usr/X11R6/lib/
Note
Input file name to "diutil_pack_file".
By executing the above commands in sequence, installation can be per-
formed correctly.
Pi4700e
5
5-3