Table of Contents
Advertisement
6
Job Management
The
Job Management
scriptive data about each print job.
(1)
Access Number
If the copy track function is to be used, enter a four-digit access number. An access
number is attached to each printing job, enabling you to carry out management at the
machine. In order to use this function, copy track function must be set at the machine.
When the copy track function is set at the machine, printing may sometimes fail to
take place until the access number designated at the machine is correctly set.
Enter the access number set in the machine.
Setting range: 0 to 9 for each box
(2)
Lock Job Password
If Lock Job is to be used, enter a four-digit lock job password. Entering
digits indicates that there is no password.
A locked printing job will be printed when it is unlocked using the Job List display on
the panel of the machine. In this case, a password is necessary.
Enter the password of the lock job.
Setting range: 0 to 9 for each box
(3)
User Name
The user name set in the printer driver is displayed as the job user name on the ma-
chine's touch panel.
Setting range: 4 numbers max
Note
If nothing is entered, the setting is turned off.
6-36
property sheet allows you to print out a page of de-
Print options
(1)
(2)
(3)
0
for all four
Pi4700e
Advertisement
Table of Contents
Troubleshooting
